Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1037

12) Install the Connector Cover to the Card Reader External Relay Harness.
• 1 Screw (Use the screws removed in step 10.)
CAUTION:
When installing the Connector Cover, be sure to place the tie-wrap on the Card Reader
External Relay Harness on the inside of the Connector Cover.
13) Install the Side Cover by putting the Card Reader External Relay Harness through a
hole of the cover.
• 2 Hooks
•
1 Screw (Use the screw removed in step 2.)
9
Installation > Card Reader-C1 > Installation Procedure
F-9-171 F-9-171
Hook
Hole
Hook
F-9-172 F-9-172
9
Installation > Card Reader-C1 > Installation Procedure
14) Close the Right Rear Cover 1.
15) Disconnect the Short Connector on the Card Reader. (The removed Short Connector
will not be used.)
16) Install the Card Reader.
16-1) Install the Card Reader to the Card Reader Mounting Plate.
•
1 Toothed Washer
•
1 Screw (RS Tightening; M4x8)
9-75
F-9-173 F-9-173
F-9-174 F-9-174
9-75