Analog - Canon imageRUNNER ADVANCE 8105 Series Service Manual

COPIER > DISPLAY > ACC-STS
PCI1 Display of PCI1-connected PCB name
Lv.1 Details To display the name of the PCB that is connected to PCI1.
Use case When checking the name of the PCB that is connected to PCI1
Adj/set/operate method N/A (Display only)
Display/adj/set range -: No PCB connected
Voice Board: Voice PCB
3DES Board: Encryption PCB
1Gbit-Board: Giga Ethernet PCB
PCI2 Display of PCI2-connected PCB name
Lv.1 Details To display the name of the PCB that is connected to PCI2.
Use case When checking name of the PCB that is connected to PCI2
Adj/set/operate method N/A (Display only)
Display/adj/set range -: No PCB connected
iSLOT: iSLOT Wireless LAN PCB
Voice Board: Voice PCB
Voice Board R: Voice Recognition PCB (Display is hidden on this
machine.)
3DES Board: Encryption PCB
1Gbit-Board: Giga Ethernet PCB
IA-RAM Display of MNCON PCB memory(IA) capacity
Lv.1 Details To display the memory (IA) capacity of the Main Controller PCB.
Use case When checking the memory capacity of the Main Controller PCB
Adj/set/operate method N/A (Display only)
Unit MB
Default value 512
8
Service Mode > COPIER > DISPLAY > ANALOG
T-8-4 T-8-4
8
Service Mode > COPIER > DISPLAY > ANALOG
■

ANALOG

COPIER > DISPLAY > ANALOG
TEMP Display of inside temperature
Lv.1 Details To display the temperature inside the machine detected by
Environment Sensor.
Use case When checking the temperature inside the machine
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 60
Unit Deg C
Appropriate target value 20 to 27
Related service mode COPIER> DISPLAY> ANALOG> HUM, ABS-HUM, PDK-TEMP
HUM Display of inside humidity
Lv.1 Details To display the humidity inside the machine detected by Environment
Sensor.
Use case When checking the humidity inside the machine
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 100
Unit %
Appropriate target value 30 to 70
Related service mode COPIER> DISPLAY> ANALOG> TEMP, ABS-HUM, PDK-HUM
ABS-HUM Display of inside moisture content
Lv.1 Details To display the absolute moisture content inside the machine detected
by Environment Sensor.
Use case When checking the moisture content inside the machine
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 100
Unit g (g/m3)
Appropriate target value 0 to 22
Related service mode COPIER> DISPLAY> ANALOG> TEMP, HUM
FIX-U Dis of Fixing Roller center temperature
Lv.1 Details To display the center temperature of the Fixing Roller detected by
the Fixing Main Thermistor.
Use case When checking the temperature at the center of Fixing Roller
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 999
Unit Deg C
FIX-UE Dis of Fixing Roller edge temperature
Lv.1 Details To display the edge temperature of the Fixing Roller detected by the
Fixing Sub Thermistor 1.
Fixing Sub Thermistor 1 is located in the rear nip inlet side of Fixing
Roller.
Use case When checking the edge temperature of the Fixing Roller
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 999
Unit Deg C
8-31
8-31