Removing The Laser Scanner Unit - Canon imageRUNNER ADVANCE 8105 Series Service Manual

4
Parts Replacement and Clearning > Laser Exposure System > Removing the Laser Scanner Unit
Laser Exposure System

Removing the Laser Scanner Unit

<Preparation>
1. Removing the Right Upper Cover.
1-1) Open the Toner Exchange Cover.
1-2) Open the Right Cover.
1-3) Open the Right Rear Cover1
1-4) Remove the Right Upper Cover.
• 2 Screws
•
1 Boss
•
3 Protrusions
x2
4
Parts Replacement and Clearning > Laser Exposure System > Removing the Laser Scanner Unit
2. Removing the Right Cover.
MEMO:
Laser Scanner Unit can be removed without removing the Right Cover.
Howerver, removing the Right Cover is recommended here for better operability.
2-1) Remove the Right Rear Cover2.
•
2 Screws
x2
2-2) Disconnect the Connector and remove the Grounding Wire and the Reuse Band.
•
1 Screw
F-4-74
2-3) Open the Right Cover.
4-92
F-4-75
F-4-76
4-92