Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1056

Affix the Antenna Adhesive Tape to the Antenna for MFP and affix the antenna to the
17)
host machine.
CAUTION: Point to Note at Installation
When opening/closing the Right Rear Cover, be careful not to trap cables.
MEMO:
Keep the remaining tapes for later use as needed.
Antenna Adhesive Tape
Antenna for MFP
18) Remove the covers of 3 Cord Guides.
9
Installation > Installation Procedure for Expansion Bus-F1, IPSec Board-B2 and Wireless LAN Board-B1 > Installation Procedure > Installing the Expan
F-9-221 F-9-221
F-9-222 F-9-222
9
Installation > Installation Procedure for Expansion Bus-F1, IPSec Board-B2 and Wireless LAN Board-B1 > Installation Procedure > Installing the Expan
CAUTION: Point to Note at Installation
Be sure to affix the Cord Guide to the area 30mm from the Right Rear Cover 1.
30 mm
Remove the release paper, and affix 3 Cord Guides.
19)
9-94
F-9-223 F-9-223
F-9-224 F-9-224
9-94