E804 To E996 - Canon imageRUNNER ADVANCE 8105 Series Service Manual

E Detail
Location Item
Code Code
E753 -0001 -05 Title Download Error
Check the log to find where the download error has been
Remedy
occurred.
<FIN_D1> Staple Finisher-D1/Booklet Finisher-D1/Paper
Folding Unit-H1/Document Insertion Unit-K1/Inner Booklet
Trimmer-A1
<PIU_B1> Professional Puncher Integration Unit-B1
When any of the above system software is displayed, check if
the target option has been installed.
When the target option has not been installed:
Turn OFF and then ON the main power supply to restore
(since there is no system software to be updated.).
When the target option has been installed:
Check if the accessory is correctly installed and if the target
system software to be downloaded is for the installed option.
Then download the appropriate system software again.
Description System Software Update Error
Error occurs when updating system software of uninstalled
options
7
Error Code > Error Code > Error Code Details > E804 to E996
Description
T-7-12
7
Error Code > Error Code > Error Code Details > E804 to E996
■

E804 to E996

E Detail
Location Item
Code Code
E804 -0000 -00 Title Error in Power Supply Cooling Fan (FM3)
Remedy Connector disconnection, failure of Fan.
Description Error in the Power Supply Cooling Fan is detected.
E804 -0000 -05 Title Power Supply Cooling Fan 1/2 error
Remedy 1. Check the connection of the Connector.
2. Replace the Power Supply Cooling Fan 1 (FM14)/Power
Supply Cooling Fan 2 (FM15).
Description The Fan stop signal is detected for 5 seconds or longer and
retry is failed 4 times in a row although the Power Supply
Cooling Fan 1 (FM14)/Power Supply Cooling Fan 2 (FM15) is
turned ON.
The error detection signal cable is shared with the Fans, and
it is not detected with which Fan the error occurs.
E804 -0001 -05 Title Fixing Power Supply Cooling Fan error
Remedy 1. Check the connection of the Connector.
2. Replace the Fixing Power Supply Cooling Fan (FM7).
Description The Fan stop signal is detected for 1.5 seconds or longer
and retry is failed 4 times in a row although the Fixing Power
Supply Cooling Fan (FM7) is turned ON.
E806 -0000 -05 Title Making Image Exhaust Fan error
Remedy 1. Check the connection of the Connector.
2. Replace the Making Image Exhaust Fan (FM3).
Description The Fan stop signal is detected for 5 seconds or longer and
retry is failed 4 times in a row although the Making Image
Exhaust Fan (FM3) is turned ON.
E808 -0001 -05 Title Fixing Power Supply error
Remedy 1. Check the outlet voltage. -> Connect to the correct outlet.
2. Check the connection between the Main Driver PCB (PCB2)
and the Fixing Power Supply PCB (PCB10).
3. Replace the Fixing Power Supply PCB (PCB10).
4. Replace the Main Driver PCB (PCB2).
Description Detected 290V or higher inlet voltage at power-on.
E808 -0002 -05 Title Fixing Power Supply error
Remedy 1. Check the outlet voltage. -> Connect to the correct outlet.
2. Check the connection between the Main Driver PCB (PCB2)
and the Fixing Power Supply PCB (PCB10).
3. Replace the Fixing Power Supply PCB (PCB10).
4. Replace the Main Driver PCB (PCB2).
Description Detected 50 V or lower inlet voltage at power-on.
7-80
Description
7-80