Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1113

10) Insert the removed HDD into the Slot.1.
Connector side
Slot.1 (HDD1)
CAUTION:
When assembling the Option HDD, be sure to pay attention to the direction.
•
Be sure that the label face of the Option HDD is up.
•
Be sure that the [A] part of the HDD Support Plate is on the other side of the
connecter.
Connecter
9
Installation > [TYPE-4] Option HDD (80GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing the M
F-9-325
[A]
Label
F-9-326
9
Installation > [TYPE-4] Option HDD (80GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing the M
11) Assemble the Option HDD (80GB). (for the second HDD)
• 1 HDD Support Plate
•
4 Anti-vibration Dampers
•
4 Spacers
• 1 Option HDD
•
1 HDD Grounding Plate
•
4 Screws (W Sems; M3x14)
(Tighten one of the screws together with the HDD Grounding Plate)
•
1 Screw (TP; M3x6)
x5
TP; M3x6
HDD Grounding
Plate
9-151
Connector
Option HDD
HDD Support Plate
Spacer
Anti-vibration Damper
F-9-327
9-151