Canon imageRUNNER ADVANCE 8105 Series Service Manual page 625

E Detail
Location Item
Code Code
E066 -0001 -05 Title Pre-transfer Charging Shutter HP open error
Remedy 1. Check the position of the Pre-transfer Charging Shutter.
1-A. In the case that the Pre-transfer Charging Shutter fails to
operate (stopped at HP at front side)
Check the connection of the Pre-transfer Charging Wire
Cleaning Motor (M7).
Sensor side: J3108, J3089 (relay), PCB side: J3088
(relay), J114 (Main Driver PCB (PCB2))
1-B. In the case that the Pre-transfer Charging Shutter is
stopped at rear side (close operation position)
1-B-1. Check that the Primary Fan Duct is closed. Close
1-B-2. Check movement of the pin to push the Pre-transfer
1-B-3. Check movement of the flag on the Pre-transfer
1-B-4. Check the connection of the Pre-transfer Charging
1-C. In the case that the Pre-transfer Charging Shutter is
stopped along the way
1-C-1. Check abrasion of the Slider Pin. Replace the Slider
1-C-2. Replace the Pre-transfer Charging Assembly.
2. Replace the DC Controller PCB (PCB1).
Description The Pre-transfer Charging Shutter Sensor (PS95) detects
that the shutter is opened although it is moved to the close
position.
7
Error Code > Error Code > Error Code Details > E000 to E069
Description
the Primary Fan Duct.
Charging Shutter Sensor (PS95). Replace the Pin.
Charging Shutter Sensor (PS95). Replace the flag/
spring.
Shutter Sensor (PS95).
Sensor side: J2114, J3215 (relay), J3067 (relay)
PCB side: J3066 (relay), J130 (Main Driver PCB
(PCB2))
Pin.
7
Error Code > Error Code > Error Code Details > E000 to E069
E Detail
Location Item
Code Code
E066 -0002 -05 Title Pre-transfer Charging Shutter HP close error
Remedy 1. Check the position of the Pre-transfer Charging Shutter.
1-A. In the case that the Pre-transfer Charging Shutter fails to
operate (stopped at HP at front side)
Check the connection of the Pre-transfer Charging Wire
Cleaning Motor (M7).
Sensor side: J3108, J3089 (relay), PCB side: J3088
(relay), J114 (Main Driver PCB (PCB2))
1-B. In the case that the Pre-transfer Charging Shutter is
stopped at rear side (close operation position)
1-B-1. Check that the Primary Fan Duct is closed. Close
1-B-2. Check movement of the pin to push the Pre-transfer
1-B-3. Check movement of the flag on the Pre-transfer
1-B-4. Check the connection of the Pre-transfer Charging
1-C. In the case that the Pre-transfer Charging Shutter is
stopped along the way
1-C-1. Check abrasion of the Slider Pin. Replace the Slider
1-C-2. Replace the Pre-transfer Charging Assembly.
2. Replace the DC Controller PCB (PCB1).
Description The Pre-transfer Charging Shutter Sensor (PS95) detects
that the shutter is closed although it is moved to the open
position.
Description
the Primary Fan Duct.
Charging Shutter Sensor (PS95). Replace the Pin.
Charging Shutter Sensor (PS95). Replace the flag/
spring.
Shutter Sensor (PS95).
Sensor side: J2114, J3215 (relay), J3067 (relay)
PCB side: J3066 (relay), J130 (Main Driver PCB
(PCB2))
Pin.
7-11
7-11