Canon imageRUNNER ADVANCE 8105 Series Service Manual page 405

4
Parts Replacement and Clearning > Image Formation System > Removing the Pre-transfer Charging Wire Cleaner, Cleaner Holder
2) Turn the Gear by hand to move the Cleaning Pad Arm to the front.
Note: Points to Note when Installing the Pre-transfer Charging Wire Cleaner Holder
Push in the Pre-transfer Charging Wire Cleaner Holder until it is secured with the Claw.
4
Parts Replacement and Clearning > Image Formation System > Removing the Pre-transfer Charging Wire Cleaner, Cleaner Holder
F-4-123
F-4-124
3) Pinch the Hook and turn it in the direction of the arrow to remove the Pre-transfer Charging
Assembly Cleaner Holder.
4) Remove the Pre-transfer Charging Wire Cleaner in the direction of the arrow.
Note:
Be careful not to damage the Pre-transfer Charging Wire when removing the Pre-
transfer Charging Wire Cleaner.
4-109
F-4-125
F-4-126
4-109