Removing The Drum Drive Unit - Canon imageRUNNER ADVANCE 8105 Series Service Manual

4
Parts Replacement and Clearning > Image Formation System > Removing the Drum Drive Unit
7) Remove the Waste Toner Feed Unit.
•
2 Connectors
• 4 Screws
x4
x2
4
Parts Replacement and Clearning > Image Formation System > Removing the Drum Drive Unit

Removing the Drum Drive Unit

<Preparation>
1. Open the Inner Cover. (Refer to "Removing the Primary Charging Assembly")
2. Remove the Primary Charging Assembly. (Refer to page 4-96)
3. Remove the Pre-transfer Charging Assembly. (Refer to page 4-106)
4. Remove the Process Unit. (Refer to page 4-114)
5. Remove the Box Cover (Left). (Refer to "Removing the Waste Toner Feed Unit")
6. Open the Controller Box. (Refer to "Removing the Waste Toner Feed Unit")
<Procedure>
1) Remove the Flywheel.
• 2 Screws
• 2 Washers
F-4-289
x2
4-168
F-4-290
4-168