Canon imageRUNNER ADVANCE 8105 Series Service Manual page 839

COPIER > FUNCTION > MISC-R
Moving to Reader Scanner Unit fix pstn
RD-SHPOS
To move the Reader Scanner Unit to the position where it is fixed
Lv.2 Details
when moving.
When moving the Reader after installation, the Reader Scanner
Unit may move and get damage. By moving the Scanner Unit to
the specified position and securing it in place with a screw before
moving, damage can be prevented.
Use case When moving the Reader after installation
Adj/set/operate method Select the item, and then press OK key.
Be sure to move the Scanner Unit to the fixing position and secure
Caution
it in place with a screw when moving the Reader after installation.
Otherwise, the Scanner Unit may get damage.
During operation: ACTIVE, When operation finished normally: OK!
Display/adj/set range
Required time A few seconds
8
Service Mode > COPIER > FUNCTION > MISC-P
T-8-52
8
Service Mode > COPIER > FUNCTION > MISC-P
■
MISC-P
COPIER > FUNCTION > MISC-P
P-PRINT Output of service mode setting value
Lv.1 Details To print the service mode setting value.
Use case Before executing the CLEAR service mode, etc.
Adj/set/operate method Select the item, and then press OK key.
Required time Approx. 120 seconds
Supplement/memo It takes approximately 15 seconds before printing starts.
KEY-HIST Output of Ctrl Panel key input history
Lv.1 Details To print the key input history on the Control Panel.
Use case When printing the key input history on the Control Panel
Adj/set/operate method Select the item, and then press OK key.
Required time Approx. 40 seconds
HIST-PRT Output of jam and error history
Lv.1 Details To print the jam history and error history.
Use case When printing the jam/error history
Adj/set/operate method Select the item, and then press OK key.
Required time Approx. 30 seconds
TRS-DATA Moving memory reception data to Inbox
Lv.2 Details To move the data received in memory to Inbox.
Use case When moving the data received in memory to Inbox
Adj/set/operate method Select the item, and then press OK key.
USER-PRT Output of user mode list
Lv.1 Details To print the user mode list.
Use case When printing the user mode list
Adj/set/operate method Select the item, and then press OK key.
Required time Approx. 35 seconds
Supplement/memo It takes approximately 3 seconds before printing starts.
LBL-PRNT Output of service label
Lv.1 Details To print the service label.
Use case When printing the service label
Adj/set/operate method 1) Place A4/LTR paper in Cassette 1.
2) Select the item, and then press OK key.
Required time Approx. 55 seconds
Supplement/memo It takes approximately 15 seconds before printing starts.
PRE-EXP Light-up of Pre-exposure LED
Lv.1 Details To light up the Cleaning Pre-exposure LED.
Open the Front Cover, and check that the LEDs light up visually.
It automatically stops after all light up.
Use case When checking that the Pre-exposure LEDs light up
Adj/set/operate method Select the item, and then press OK key.
Caution Drum memory may occur, so be sure not to execute this item
frequently.
During operation: ACTIVE, When operation finished normally: OK!
Display/adj/set range
Required time Approx. 30 seconds
8-124
8-124