Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1220

6) Install the HDD Lock Pin and the HDD Lock Spring to the removed rail.
7) Return the rail to its original position.
•
2 Bosses
•
2 Screws (Use the screws removed in step 4).)
Hole
Hole
x2
Boss
8) Insert the HDD Drawer Unit into the hole on the HDD Case Unit to install it.
•
2 Screws (TP Round End; M3x6)
9) Close the Edge Saddle.
x2
9
Installation > [TYPE-9] 2 Option HDDs (250GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Pro
Boss
F-9-516
Edge Saddle
F-9-517
9
Installation > [TYPE-9] 2 Option HDDs (250GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Pro
■
Installing the Mirroring Board or Encryption Board and HDD
Case Unit
MEMO:
The following shows combination of the HDD and the Mirroring Board or Encryption
Board.
•
Connect "CH A" to Slot.1 (The new HDD)
•
Connect "CH B" to Slot.2 (The new HDD)
C H
C H
Power Supply Cable
B Signal Cable
A Signal Cable
Power Supply Cable
F-9-518
9-258
9-258