Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1277

In the Case of Fixed HDD
■
Assembling the Option HDD
CAUTION:
When assembling the Option HDD, be sure to pay attention to the direction.
•
Be sure that the label face of the Option HDD is up.
• Be sure that the [A] part of the HDD Support Plate is on the other side of the
connecter.
Connecter
9
Installation > HDD Data Encryption & Mirroring Kit-C2 > In the Case of Fixed HDD > Assembling the Option HDD
[A]
Label
F-9-629
9
Installation > HDD Data Encryption & Mirroring Kit-C2 > In the Case of Fixed HDD > Assembling the Option HDD
1) Assemble the Option HDD. (For the 2nd HDD)
• 1 Option HDD
•
1 HDD Support Plate
•
4 Anti-vibration Dampers
• 4 Spacers
•
1 HDD Grounding Plate
•
4 Screws (W SEMS; M3x14) (Tighten one of the screws together with the HDD Grounding
Plate)
•
1 Screw (TP ; M3x6)
x5
TP; M3x6
HDD Grounding
Plate
9-315
Connector
Option HDD
HDD Support Plate
Spacer
Anti-vibration Damper
F-9-630
9-315