Installation Procedule
1) Open the DADF.
2) Remove the right retainer cover.
•
2 screws
x2
9
Installation > Reader Heater Unit > Installation Procedule
3) Remove the DF cable cover.
•
2 screws
CAUTION:
When removing the copyboard glass, be sure not to get your fingers touched with
the glass surface or the backside of the white plate.In case the glass is soiled, clean
it with lint-free paper.
F-9-104
F-9-104
F-9-105
F-9-105
9
Installation > Reader Heater Unit > Installation Procedule
x2
9-49
F-9-106
F-9-106
F-9-107
F-9-107
9-49