Canon imageRUNNER ADVANCE 8105 Series Service Manual page 855

■
IMG-FIX
COPIER > OPTION > IMG-FIX
Set fixing cleaning execution interval
FIX-CLN
To set the number of sheets as the intervals to execute fixing
Lv.1 Details
cleaning.
By performing idle rotation of the Fixing Assembly for 5 seconds
every time a specified number of sheets are fed , remove soil
adhered on the Pressure Roller.
Set 1 when an image failure occurs. If it is not alleviated, set 2 or 3.
Because idle rotation is executed by interrupting an ongoing job, as
the short execution interval is set, productivity decreases.
Use case When an image failure due to the Pressure Roller occurs
Adj/set/operate method Enter the setting value, and then press OK key.
Caution As the short execution interval is set, productivity decreases.
Display/adj/set range 0 to 3
0: OFF, 1: 500 sheets, 2: 300 sheets, 3: 150 sheets
Default value 0
FIX-TEMP Setting of down sequence mode
Lv.1 Details To set the temperature of the Fixing Assembly to shift to down
sequence mode.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: Standard -5 degC, 1: Standard, 2: Standard +5 degC
Default value 1
Setting of fixing improvement mode
FSPD-S1
To set whether to start the machine in fixing improvement mode.
Lv.2 Details
When 1 to 4 is set, duration of warm-up is increased for the specified
time to increase the temperature of the Fixing Assembly.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 4
0: 0 second, 1: 30 seconds, 2: 60 seconds, 3: 90 seconds, 4: 120
seconds
Default value 0
8
Service Mode > COPIER > OPTION > IMG-FIX
8
Service Mode > COPIER > OPTION > IMG-FIX
COPIER > OPTION > IMG-FIX
CBLTINVL Setting of Fixing Web Solenoid ON times
Lv.1 Details To set frequency to turn ON the Fixing Cleaning Web Drive Solenoid.
If an image failure occurs due to the soiled Pressure Roller, set 1.
If an image failure occurs due to the soiled Separation Claw, set 2.
If the life of Fixing Cleaning Web is shorter than the target (500,000
sheets) (in case of much take-up amount of web), set 3.
Use case - When an image failure due to the soiled Pressure Roller/Separation
Claw occurs
- When the life of Fixing Cleaning Web is too short
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 3
0: Normal, 1: 1.5 times higher than normal, 2: 0.5 times higher than
normal, 3: 0.75 times higher than normal
Default value 0
Set fixing control temp table: Thin
TMP-TBL2
Lv.1 Details To set the control temperature table of the Fixing Roller for 52 to 63g/
2
m size paper.
Use case When alleviating the curl
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -5 to 2
-5 to -1: -5 degC, 0: 0 degC, 1 to 2: +5 degC
Unit 5 degC
Default value 0
Set fixing control temp table: Heavy
TMP-TBL3
Lv.1 Details To set the control temperature table of the Fixing Roller for 91 to
2
256g/m size paper.
Use case When alleviating the curl
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -5 to 2
-5 to -2: -10 degC, -1: -5 degC, 0 to 2: 0 degC
Unit 5 degC
Default value 0
Set fixing control temp table: Bond
TMP-TBL4
Lv.1 Details To set the control temperature table of the Fixing Roller for bond
paper.
Use case When alleviating the curl
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -5 to 2
-5 to 2: 0 degC
Unit 5 degC
Default value 0
8-140
8-140