Canon imageRUNNER ADVANCE 8105 Series Service Manual page 611

●
[4]: Format HDD
This mode executes formatting of BOOTDEV partition or the entire HDD.
Operation procedure
1) Enter download mode.
2) Connect the USB memory storage device to the USB port.
3) Press the key on the Control Panel.
[4] -> [0]: To execute formating /Any key other than [0] key: To return to the menu screen.
[[[[[ download Menu (USB) ]]]]]]]]]]]
-------------------------------------
[1]: Upgrade (Auto)
[2]: Upgrade (w Confirmation)
[3]: Upgrade (Overwrite all)
[4]: Format HDD
[5]: Backup
[7]: Clear downloaded files
[8]: download Menu 2
[9]: Other Menu
/[4] has been selected. Execute?/
- (OK):0 / (CANCEL):Any other keys -
6
Troubleshooting > Version upgrade > Version Upgrade using USB memory Storage Device > Formatting HDD
F-6-125 F-6-125
6
Troubleshooting > Version upgrade > Version Upgrade using USB memory Storage Device > Formatting HDD
4) Press the key on the Control Panel.
[1] -> [0]: To execute formatting BOOTDEV/Any key other than [0]: To return to the menu
screen.
[2] -> [0]: To execute formatting the entire HDD/Any key other than [0]: To return to the
menu screen.
[C]: To return to the menu screen.
Once downloading is complete, a message is displayed to encourage pressing the "Reset"
key.
5) Press any key to return to the menu screen.
6) Download the system software.
Refer to "Separate Download" for details.
6-64
F-6-126 F-6-126
6-64