Canon imageRUNNER ADVANCE 8105 Series Service Manual page 571

[Image]
Feed Direction
< Smeared Image >
Side Line
Select the following to execute Full Adjust: "Settings/Registration > Adjustment Maintenance
> Adjust Image > Auto Adjust Gradation < Full Adjust"; and check the output result.
1) COPIER > ADJUST > DENS > DMAX-N-T; reduce the value of DMAX-N-T from 895
(default) by -30.
2) Select the following to execute DMAX-N: COPIER > FUNCTION > MISC-P > DMAX-N; and
then check the output result.
If the symptom is not improved, further reduce the value in step 1) by -30 and then execute
step 2).
CAUTION :
Changing the above setting can cause reduced density or thinner line
If the smeared image is not improved within the acceptable range for density and line width,
execute skipping process in the following procedure:
1) COPIER > OPTION > IMG-FIX > RAG-SW; change the value to 1
2) COPIER > FUNCTION > IMG-FIX > RAG-CONT; change to 1 and check the output result.
3) If the symptom is not improved, change the value in step 2) to 2, 3...and check the output
result.
CAUTION :
Changing the above setting can cause minor skipping in the text part.
6
Troubleshooting > Image Faults > Smeared image
6
Troubleshooting > Image Faults > Smeared image
F-6-45 F-6-45
6-24
6-24