Canon imageRUNNER ADVANCE 8105 Series Service Manual page 1034

See the following table for the parts to be used.
No Name
[1] Card Reader Mounting Plate
[2] Card Reader
[3] Connector Cover1
[4] Connector Cover2
[5] Card Reader External Relay Harness
[6] Connector Case
[7] Cord Guide
[8] PCB Spacer
[9] Screw (TP; M4x12)
[10] Screw (RS tight; M4x8)
[11] Screw (Bindeing; M4x20)
[12] Screw (TP; M3x6)
Check Items when Turning OFF the Main Power
Check that the main power switch is OFF.
1) Turn OFF the main power switch of the host machine.
2) Be sure that Control Panel Display and Main Power Lamp are both turned OFF, and
then disconnect the power plug.
9
Installation > Card Reader-C1 > Installation Procedure
Q'ty Part to be used
1pc Yes
1pc Yes
1pc Yes
1pc No
1pc Yes
2pcs Yes
1pc Yes
1pc Yes
1pc Yes
1pc Yes
1pc No
1pc Yes
T-9-6 T-9-6
9
Installation > Card Reader-C1 > Installation Procedure
Installation Procedure
CAUTION:
• Refer to "Combination of options" when installing this equipment before operation.
•
After installing the Card Reader, enter the card number to be used in the following
service mode of this equipment: COPIER > FUNCTION > INSTALL > CARD.
Otherwise, the card will not be recognized even inserting it.
1) Press [A] part, and open the Right Rear Cover 1.
[A]
9-72
F-9-163 F-9-163
9-72