10)
Install the Upright Control Panel to the Upright Arm.
•
2 Protrusions
•
2 Bosses
•
4 Screws (TP; M4 x 8)
MEMO:
•
Be careful not to trap the Harness [A] with the Panel Base.
Be sure to tighten the upper screw first.
•
Upright Control Panel
x4
[A]
Upright Arm
9
Installation > Installation > Installation of the Upright Control Panel
Boss
Protrusion
Boss
Cable
F-9-20
F-9-20
9
Installation > Installation > Installation of the Upright Control Panel
11)
Install the wire.
•
1 Screw (TP; M4 x 8)
9-13
F-9-21
F-9-21
9-13