Table of Contents
Advertisement
Description
There are three routines:
•
All Network NVM - This initialization will default all network and configuration settings to a
pre-installation state.
•
Variable NVM - The items that will be initialized are related to crash recovery, software
upgrade settings, alterate boot and any other items needing to be set to default values
that are not included in the network controller configuration initialization routine.
•
Configuration NVM - This initialization will clear all fault and system usage counters, net-
work controller variable, configuration NVM and reset the network controller error log.
Procedure
1.
Save the NVM to disk, GP 5.
2.
Enter diagnostics, GP 1.
3.
Select Diagnostic Routines.
4.
Select Network Routines, 132 NVM initialization-Network.
5.
Touch the appropriate button to select the NVM to be initialized and follow the on screen
instructions.
6.
Switch off the machine, then switch on the machine, GP 14.
Embedded Fax NVM initialization
Purpose
To return to default the embedded fax NVM settings that are stored on the compact flash card.
Refer to dC131b NVM table chain 20 table 6.
Procedure
1.
Save the NVM to disk, GP 5.
2.
Enter diagnostics, GP 1.
3.
Select Diagnostic Routines.
4.
Select Fax dC Routines, 132 NVM initialization
5.
Touch the appropriate button to select the NVM to be initialized and follow the screen
instructions. Refer to Table 2, for the functions that are reset to default.
•
Reformat
•
All Fax Directories
•
Fax Job NVM
•
Fax Configuration NVM
•
Fax SA / KO Settings NVM
6.
Switch off the machine, then switch on the machine, GP 14.
NVM to Install Condition
The Dust Off routines are available to return the machine to a pre-installed state, refer to Table
1.
Dust Off
CAUTION
If a network controller is installed, the Dust Off routine for the network controller must be per-
formed before the NVM Dust Off routine.
The NVM Dust Off routine will:
•
Clear all non-billing counters.
WorkCentre 5687 Family
•
Default all SA / KO NVM including default PINs.
•
Clear fault history.
•
Set the install NVM (install Byte) to default to enable an install procedure at the next
power-on, while retaining all existing configuration NVM e.g. paper path registration, xero-
graphic parameters and market configuration values.
NOTE: The auditron is initialized using the auditron setup routine, refer to User Guide.
•
Not alter any protected NVM.
The routine is accessed and performed as follows:
1.
Save the NVM to disk, GP 5.
2.
Enter diagnostics, GP 1.
3.
If the copier is fitted with a network controller, perform the network controller Dust Off pro-
cedure before continuing with this procedure.
4.
Select Diagnostic Routines, then Copier Routines, then 132 NVM initialization-Copier,
then System Counters Dust Off.
5.
Follow the on-screen instructions.
6.
Switch off the machine, then switch on the machine, GP 14.
Table 1 Copier NVM
Initialization Function
NVM ALL
IOT (with Flag type: = Reset All
Billing Counter
System Usage Counter
Fault Counter
Diagnostic Counter
SA / KO Setting
Fault Log
Configuration
Diagnostic
Debug
NVM Machine Variable
IOT with Flag type: = Reset Nominal
Machine Variable Zero
Machine Variable Registration
Machine Variable Paper Path
Machine Variable DADH
Machine Variable Platen
Auditron
Crash Recovery
Completed Job Log
August 2007
6-303
Machine
System
All Copier
Variable
SA / KO
counters
NVM
NVM
Dust Off
Dust Off
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
General Procedures & Information
dC132
Hide quick links:
Advertisement
Chapters
Table of Contents
