Configuration Example - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510
Table 2-5 Determine the command level (A)
Authentication
mode
None
(authentication-
mode none)

2.4.2 Configuration Example

I. Network requirements
Assume that you are a level 3 VTY user and want to perform the following configuration
for users logging in through the Console port:
Do not authenticate users logging in through the Console port.
Commands of level 2 are available to users logging into the AUX user interface.
The baud rate of the Console port is 19,200 bps.
The screen can contain up to 30 lines.
The history command buffer can contain up to 20 commands.
The timeout time of the AUX user interface is 6 minutes.
II. Network diagram
User PC running Telnet User PC running Telnet
Figure 2-5 Network diagram for AUX user interface configuration (with the
authentication mode being none)
III. Configuration procedure
# Enter system view.
Chapter 2 Logging in through the Console Port
Scenario
User type
The user privilege level
Users
level command not executed
logging in
through
The user privilege level
Console
level
ports
executed
Ethernet Ethernet
Huawei Technologies Proprietary
2-8
Command
command already
Ethernet1/0/1 Ethernet1/0/1
Command
level
Level 3
Determined
by the level
argument