ABB IRB 7600 Series Product Manual page 317

2. Pull out the sealing spacers, but let them still
3. Apply Mercasol 3106 to the shaft and hole in
4.
3HAC022033-001 Revision: K
工控帮助教小舒QQ2823408167
Action
remain on the ear.
• Apply rust preventive abundantly in the
gap
• press the sealing back in place
• wipe off surplus material.
frame.
DANGER!
Make sure all safety requirements are met when
performing the first test run. These are further
detailed in the section DANGER - First test run
may cause injury or damage! on page
4.5.3. Replacement of balancing device
Note
xx0600003131
• A: Sealing spacers
xx0600003130
• A: Mercasol on shaft and in
hole
• B: Mercasol between piston
rod and ear
47.
4 Repair
Continued
315