Safe Use Of The Flexpendant - ABB IRB 7600 Series Product Manual

1 Safety

1.2.3.6. Safe use of the FlexPendant

1.2.3.6. Safe use of the FlexPendant
NOTE!
The enabling device is a push-button located on the side of the FlexPendant which, when
pressed halfway in, switches the system to MOTORS ON. When the enabling device is
released or pushed all the way in, the manipulator switches to the MOTORS OFF state.
To ensure safe use of the FlexPendant, the following must be implemented:
Enabling device
The enabling device is a manually operated, constant pressure push-button which, when
continuously activated in one position only, allows potentially hazardous functions but does
not initiate them. In any other position, hazardous functions are stopped safely.
The enabling device is of a specific type where you must press the push-button only half-way
to activate it. In the fully in and fully out positions, manipulator operation is impossible.
Hold-to-run function
The hold-to-run function allows movement when a button connected to the function is
actuated manually and immediately stops any movement when released. The hold-to-run
function can only be used in manual mode.
How to operate the hold-to-run function is described in Operating manual - IRC5 with
FlexPendant.
34
工控帮助教小舒QQ2823408167
•
The enabling device must never be rendered inoperational in any way.
•
During programming and testing, the enabling device must be released as soon as
there is no need for the manipulator to move.
• The programmer must always bring the FlexPendant with him/her when entering the
manipulator's working space. This is to prevent anyone else from taking control of the
manipulator without the programmer's knowledge.
3HAC022033-001 Revision: K