Warning - Safety Risks During Work With Gearbox Lubricants (Oil Or Grease) - ABB IRB 7600 Series Product Manual

1.3.7. WARNING - Safety risks during work with gearbox lubricants (oil or grease)

1.3.7. WARNING - Safety risks during work with gearbox lubricants (oil or grease)
Description
When handling gearbox lubricants, there is a risk of both personal injury and product damage
occurring. The following safety information must be regarded before performing any work
with lubricants in the gearboxes.
Warnings and elimination
Warning
-
Hot oil or grease
.
Allergic reaction
-
Possible pressure
build-up in gearbox
-
Do not overfill
-
Do not mix types of oil
-
Heat up the oil
3HAC022033-001 Revision: K
工控帮助教小舒QQ2823408167
Description
Changing and draining gearbox
oil or grease may require
handling hot lubricant heated up
to 90 °C.
When working with gearbox
lubricant there is a risk of an
allergic reaction.
When opening the oil or grease
plug, there may be pressure
present in the gearbox, causing
lubricant to spray from the
opening.
Overfilling of gearbox lubricant
can lead to internal over-
pressure inside the gearbox
which in turn may:
• damage seals and
gaskets
• completely press out
seals and gaskets
• prevent the robot from
moving freely.
Mixing types of oil may cause
severe damage to the gearbox.
Warm oil drains quicker than
cold oil.
1 Safety
Elimination/Action
Make sure that protective gear
like goggles and gloves are
always worn during this activity.
Make sure that protective gear
like goggles and gloves are
always worn.
Open the plug carefully and
keep away from the opening. Do
not overfill the gearbox when
filling.
Make sure not to overfill the
gearbox when filling it with oil or
grease!
After filling, check the correct
level.
When filling gearbox oil, do not
mix different types of oil unless
specified in the instructions.
Always use the type of oil
specified by the manufacturer!
When changing gearbox oil, first
run the robot for a time to heat
up the oil.
Continues on next page
51