Decommissioning; Environmental Information - ABB IRB 7600 Series Product Manual

6 Decommissioning

6.1. Environmental information

Hazardous material
The table specifies some of the materials in the robot and their respective use throughout the
product.
Dispose components properly to prevent health or environmental hazards.
Material
Batteries, NiCad or Lithium
Copper
Cast iron/nodular iron
Steel
Neodymium
Plastic/rubber
Oil, grease
Aluminium
Oil and grease
Where possible, arrange for oil and grease to be recycled. Dispose of via an authorized
person/contractor in accordance with local regulations. Do not dispose of oil and grease near
lakes, ponds, ditches, down drains, or onto soil. Incineration must be carried out under
controlled conditions in accordance with local regulations.
Also note that:
3HAC022033-001 Revision: K
工控帮助教小舒QQ2823408167
• Spills can form a film on water surfaces causing damage to organisms. Oxygen
transfer could also be impaired.
•
Spillage can penetrate the soil causing ground water contamination.
6 Decommissioning
6.1. Environmental information
Example application
Serial measurement board
Cables, motors
Base, lower arm, upper arm
Gears, screws, base frame, and so on.
Brakes, motors
Cables, connectors, drive belts, and so on.
Gearboxes
Covers, sync. brackets
415