Real-Time Monitor; Steps Until The Collected Data Is Saved - Mitsubishi Electric MELSEC iQ-R Series User Manual

Real-time monitor

Real-time monitor is used to set the data collection and monitor the collected data (waveform display) in real time in the status
where the engineering tool has been connected with the motion system.
For details, refer to Help of the engineering tool.

Steps until the collected data is saved

Data logging
The motion system executes data logging according to the description of logging setting files.
The control and monitor of data logging are executed by the LOGGING_REF structure.
The collected data is saved to the internal buffer in real-time processing and it is saved to the file in back-ground processing.
Writing
Engineering
Monitoring,
tool, Upper
controlling
system, etc.
Specified
data
Reading
Motion system
Logging setting file 1
Target data
Data logging setting
Trigger condition setting
LOGGING_REF structure 1
Control data
Monitor data
Internal buffer
Setting 1
First sampling data
Second sampling data
Data logging file 1
First sampling data
Second sampling data
Logging setting file 10
Target data
Data logging setting
Trigger condition setting
LOGGING_REF structure 10
Control data
Monitor data
Setting 10
First sampling data
Second sampling data
Data logging file 10
First sampling data
Second sampling data
15.1 Data Logging/Real-Time Monitor
15
15 LOGGING
457