Mitsubishi Electric MELSEC iQ-R Series User Manual page 620

■Axis group
(1)
(2)
APPX
618
Appendix 2 Motion Module Programs
1.
From the [Navigation window], right click [Axis Group] (1),
then select [Add New Data] (2).
2.
Carry out the setting of the axis group to be created, then
click the [OK] button.
• Data Name:
Set the instance name of the axis group to be used in the ST
program.
3.
*1
The [Data name ] is added to the [Navigation
window][Axis Group] and the parameter editor is
displayed.
*1: The set data name is displayed.
4.
Set the structuring axes for the created axis group. Set
the [Data Name] (the instance name for the axis to be
used in the ST program) that was set in the [Navigation
window][Axis].
5.
When the setting of parameters for the axis group is
complete, click the [Apply] button.