Mitsubishi Electric MELSEC iQ-R Series User Manual page 606

APPX
604
Appendix 2 Motion Module Programs
(6)
12.
Return to the "CC-Link IE TSN Configuration" screen.
Place a check in the Parameter Automatic Setting (6)
check box.
*: When performing writing of the servo parameters, place a check in "CC-Link
IE TSN Configuration" (7) on the "Online Data Operation" screen.
(7)
13.
Select [Close with Reflecting the Setting], then close the
"CC-Link IE TSN Configuration" screen.
14.
Click the [Apply] button to complete Module Parameter
(Network) settings.