Mitsubishi Electric MELSEC iQ-R Series User Manual page 414

• InputsScaling (InputScaling)/OutputScaling(OutputScaling)
The operation profile data can be enlarged or reduced by setting InputsScaling/OutputScaling (OutputScaling).
InputsScaling can be specified as an array for each element of Inputs respectively.
Output OutputScaling
3.0
1.0
OutputOffset
Output
value
InputsOffset
Input value
• ProfileID (Profile ID)
Specify the multidimensional profile data ID with the PROFILE_ID structure.
Start mode
The following table show the operation when simultaneously executing various operation profile data FBs (open, write, read,
control) that access open areas to the same profile ID.
• ExecutionMode
For the operation profile data open FB and the operation profile data write FB, the operation for simultaneous execution can
be specified with ExecutionMode.
: Execution possible, : Error
On-going FB
Open/Write
Read
Control
[0: mcImmediately]
When a read FB and a control FB are in execution, description in the open area is immediately changed by an open FB and a
write FB. The change may affect the control in execution.
When an open FB and a write FB are in execution, the error "Operating operation profile data" (error code: 3411H) occurs,
and the open area is not changed.
[1: mcQueued]
Waits execution completion of on-going FB. When multiple FBs are waiting, the FBs will be executed in high priority task. For
the same priority, the FBs will be executed in the order of the start.
[3: mcSpeculatively]
The error "Operating operation profile data" (error code: 3411H) occurs, and the open area is not changed.
13 OPERATION PROFILE FUNCTION
412
13.1 Operation Profile Data
FB to be executed
Open/Write
mcImmediately mcQueued
 
 
 
1.0 1.5
InputsScaling
Inputs
Read
mcSpeculatively
 
 
 
Control


