Mitsubishi Electric MELSEC iQ-R Series User Manual page 607

Module parameter settings
Set the module parameters (Motion).
Displayed items
■Module operation setting
Item
Module extended parameter storage target setting
• Module extended parameter storage target setting
Set the target for module extended parameters to be used for the Motion module. When writing the module extended
parameters from GX Works3, write to the target that is specified for this parameter.
Setting
Motion module (built-in memory)
Motion module (SD memory card)
1.
*1: The model name of the set Motion module is displayed.
Description
Use the module extended parameter that is written to the flash ROM of the Motion module.
Use the module extended parameter that is written to the SD memory card of the Motion module.
From the [Navigation window], select [Parameter]
[Module Information][Module model name
Parameter (Motion)] to display the parameter editor.
Set the parameters in "Module Operation Setting".
Setting range
Motion module (built-in memory), Motion
module (SD memory card)
Appendix 2 Motion Module Programs
*1
][Module
Initial value
Motion module (built-in
memory)
A
APPX
605