Data Logging Function - Mitsubishi Electric MELSEC iQ-R Series User Manual

Data logging function

Data logging function is used to collect the motion system data at a specified interval based on the logging setting (trigger
condition or data collection condition) written by the engineering tool and save the result to the data logging file.
The collected data is saved as the logging file. The data logging setting up to 10 can be executed at the same time in the
motion system.
Equipment
Motion system logging setting window
15 LOGGING
456
15.1 Data Logging/Real-Time Monitor
Word device
Bit device
Device value
Sampling interval
(CPU module)
Period of
data logging
Motion system setting window
SD memory card
Data logging file
2018/06/01 10:15:18.001000000
2018/06/01 10:15:18.001100000
:
:
2018/06/01 10:15:18.001900000
2018/06/01 10:15:18.002000000
2018/06/01 10:15:18.002100000
:
:
2018/06/01 10:15:18.001900000
2018/06/01 10:15:18.002000000
Edge, cloud
ON ,11 ,186
ON ,11 ,187
ON ,11 ,94
ON ,13 ,90
ON ,13 ,87
ON ,13 ,21
OFF ,12 ,24
Target data
Motion system logging state check and
operation window