Mitsubishi Electric MELSEC iQ-R Series User Manual page 566

Error Error
code (System/
(Hexad axis/axes
ecimal) group)
3C14H System
3C2FH System
22 TROUBLESHOOTING
564
22.5 List of Error Codes
Error name Error detail and cause
Hardware Error An error was detected in the
hardware.
Memory Error An error was detected in the
memory.
Detection Operation at
timing (At error
start/ occurrence
during
control
During Stops the system.
operation
During Stops the system.
operation
Remedy
• Please take measures
to reduce noise.
• Please reset the CPU
module, and run it
again. If the same
error occurs again
even after taking the
above, the possible
cause is a hardware
failure of the module,
base unit, or extension
cable. Please consult
your local Mitsubishi
representative.
• Please take measures
to reduce noise.
• Please format the
memory. And, please
write all files, reset the
CPU module, and run
it again. If the same
error occurs again
even after taking the
above, the possible
cause is a hardware
failure of the CPU
module. Please
consult your local
Mitsubishi
representative.