Sub Function Of Operation Profile Data Control - Mitsubishi Electric MELSEC iQ-R Series User Manual

Sub function of operation profile data control

Current value per cycle change function
Change the current value per cycle of an operation profile data control FB to an arbitrary value.
• Set ProfileCalc.InstanceID of operation profile data control FB (Instance name indicates ProfileCalc as follows) in
InstanceID. It is valid to FBs which have ProfileCalc.InputsPerCycle.
• Change ProfileCalc.InputsPerCycle to the value specified with Cycle.
• Change ProfileCalc.Reference to match the change of ProfileCalc.InputsPerCycle as well.
This FB execution does not affect the control of ProfileCalc specified with instanceID. However, when the
operation profile data which ProfileCalc uses in control is opened, and setting SlaveAbsolute = TRUE, the
change will not be executed because ProfileCalc.Reference becomes Fixed value.
• There are two methods as follows for current value per cycle change.
Method
MCv_ChangeCycle
MCv_ChangeCycleTriggered
• For specification of the current value per cycle to be changed, "absolute specification" or "relative specification" can be
selected by Relative.
13 OPERATION PROFILE FUNCTION
414
13.1 Operation Profile Data
Description
Change it to the specified value at control execution.
Compensate the specified value at the trigger input signal detection timing. Change it to the compensated value.