Subaru Legacy 2004 Service Manual page 3405

In-Vehicle Sensor (Auto A/C Model)
HVAC SYSTEM (HEATER, VENTILATOR AND A/C)
23.In-Vehicle Sensor (Auto A/C
Model)
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the instrument panel lower cover. <Ref.
to EI-50, REMOVAL, Instrument Panel Lower Cov-
er.>
3) Disconnect the connector and aspirator hose,
remove the pawl and remove the in-vehicle sensor
(A) from instrument lower cover.
(A)
AC-00790
CAUTION:
Be careful not to damage the sensors and inte-
rior trims when removing.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
<Ref. to AC(diag)-32, IN-VEHICLE SENSOR, Di-
agnostic Procedure for Sensors.>
AC-43