Subaru Legacy 2004 Service Manual page 3338

POWER ASSISTED SYSTEM (POWER STEERING)
Tightening torque:
#
13 N m (1.3 kgf-m, 9.4 ft-lb)
(1) Hose ASSY
(2) Hose bracket
12) Install the air intake duct.
<Ref. to IN(H4DOTC)-9, INSTALLATION, Air In-
take Duct.> <Ref. to IN(H4SO 2.0)-9, INSTALLA-
TION, Air Intake Duct.>
13) Connect the battery ground cable to battery.
14) Feed the specified fluid.
CAUTION:
Never start the engine before feeding the fluid;
otherwise vane pump might be seized up.
15) Finally, check clearance between pipes or hos-
es as shown in the figure indicated in "General Di-
agnostic Table". <Ref. to PS-89, INSPECTION OF
CLEARANCE, INSPECTION, General Diagnostic
Table.>
Pipe Assembly [LHD Model]
(2)
(1)
PS-00451
PS-68