Subaru Legacy 2004 Service Manual page 3389

8. Blower Motor
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the glove box lower cover. <Ref. to EI-
51, REMOVAL, Glove Box.>
3) Disconnect the connector of blower motor.
4) Loosen the screw to remove blower motor.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
Connect the battery positive (+) terminal to terminal
No. 2 of blower motor, and negative (%) terminal to
terminal No. 1. Check the blower motor for smooth
rotation.
2 1
Blower Motor
HVAC SYSTEM (HEATER, VENTILATOR AND A/C)
AC-00957
AC-00915
AC-27