Subaru Legacy 2004 Service Manual page 3809

• Secure the hog ring using hog ring pliers.
• Install the hog rings to the specified points
securely and make sure that no wrinkle or twist-
ing on the backrest cover.
Tightening torque:
Refer to "COMPONENT" of "General Descrip-
tion". <Ref. to SE-2, FRONT SEAT (STAN-
DARD SEAT), COMPONENT, General
Description.>
E: INSPECTION
1. SEAT COVER
Check that no tear or fray on the backrest cover
and seat cushion cover.
NOTE:
When the side airbag equipped model has tear or
fray on the door side of backrest cover, the side air-
bag may not be deployed properly. Replace it with
new one in such a case.
2. SEATING SENSOR
Make sure the passenger's seat belt warning light
illuminates when applying load to the rear surface
of passenger's seat cushion. If not, replace the seat
cushion pad with a new one.
Front Seat
SE-00418
SE-13
SEATS