Subaru Legacy 2004 Service Manual page 3811

3) Remove the hook (A) by pushing it backward
while lifting up the front side of seat cushion to de-
tach seat cushion.
4) Remove the headrest, and then tilt the backrest
forward.
5) Remove the luggage floor box. <Ref. to EI-74,
REMOVAL, Luggage Floor Box.>
6) Remove the hinge assembly CTR bolts.
7) Remove the backrest from hinge assembly LH
(hinge assembly RH).
Rear Seat
NOTE:
The backrest cannot be detached when the hinge
assembly side does not mate with the backrest pin
position.
8) Remove the lower anchor bolt (A) of outer seat
belt and backrest shoulder bolt (B).
(A)
9) Remove the backrest shoulder with lifting it up.
SE-00397
10) Remove the belt cover (A) from backrest shoul-
der cover, and then pull out the seat belt.
SE-00153
B: INSTALLATION
1. SEDAN MODEL
Install in the reverse order of removal.
NOTE:
• After installing the backrest, make sure that each
seat belt operates normally.
• Make sure that they are secured on each hook of
vehicle side.
SE-00348
SE-15
(A)
(B)
SE-00349
SE-00350
(A)
SE-00351
SEATS