Subaru Legacy 2004 Service Manual page 3309

12) Install the valve to pinion, and install the snap
ring.
(1) Snap ring
(2) Valve
13) Fit the pinion & valve assembly into valve hous-
ing.
(1)
(1) Valve housing
(2) Pinion & valve ASSY
14) Using a press, press-fit the pinion & valve as-
sembly into housing by pressing the bearing outer
race.
(1) Pinion & valve ASSY
(2) Bearing
(3) Housing
15) Apply the specified grease to dust cover.
Steering Gearbox [LHD Model]
(2)
(1)
PS-00531
(2)
PS-00532
(1)
(2)
(3)
PS-00533
POWER ASSISTED SYSTEM (POWER STEERING)
16) Install the dust cover on valve assembly.
CAUTION:
Be sure to install the dust cover to groove on
shaft properly.
(1) Dust cover
(2) Groove
17) Apply genuine grease to the pinion gear and
bearing of valve assembly.
18) Install a new O-ring on valve assembly.
(1)
(1) O-ring
PS-39
(1)
(2)
PS-00534
PS-00165
PS-00535