Subaru Legacy 2004 Service Manual page 3468

AIRBAG SYSTEM
6. Side Airbag Module
A: REMOVAL
CAUTION:
Refer to "CAUTION" of General Description be-
fore handling the airbag module. <Ref. to AB-4,
CAUTION, General Description.>
NOTE:
Remove the passenger's side by referring to driv-
er's side.
1) Turn the ignition switch to OFF.
2) Disconnect the ground cable from battery and
wait for at least 20 seconds before starting work.
3) Remove the front seats. <Ref. to SE-7, REMOV-
AL, Front Seat.>
4) Remove the clip from reverse side of seat cush-
ion assembly and slide rail IN (A), and then remove
the side airbag harness.
(A)
5) Remove the backrest cover. <Ref. to SE-7, DIS-
ASSEMBLY, Front Seat.>
6) Remove the side airbag harness from backrest
frame assembly.
Side Airbag Module
7) Remove the side airbag module (A) from back-
rest frame assembly.
AB-00472
AB-00450
AB-16
(A)
AB-00451