Subaru Legacy 2004 Service Manual page 3763

20.Rearview Mirror
A: REMOVAL
NOTE:
Never reuse the spring. Prepare a new spring be-
fore removal.
1) Turn the mirror base 90% clockwise or counter-
clockwise to remove it.
2) Remove the spring from rearview mirror mount.
CAUTION:
Be careful not to damage the mirror surface.
3) When the rearview mirror mount is damaged,
use the piano wire or spatula to remove.
CAUTION:
Be careful not to damage the windshield glass.
B: INSTALLATION
1) When the rearview mirror mount is removed,
clean the old adhesive, and mate with the wind-
shield glass mark to install.
Adhesive:
REPAIR KIT IN MR (Part No. 65029FC000) or
equivalent
2) Ensure the rearview mirror mount is securely at-
tached and then install the spring to it.
3) Install in the reverse order of removal.
C: INSPECTION
Check that the mirror is not damaged.
Check that the spring is not damaged.
Rearview Mirror
GW-00046
GW-35
GLASS/WINDOWS/MIRRORS