Subaru Legacy 2004 Service Manual page 3857

14.Trunk Lid Lock Assembly
A: REMOVAL
1. MODEL WITHOUT DOUBLE LOCK
1) Disconnect the connectors and detach the trunk
opener cable.
2) Remove the two bolts to remove trunk lid lock
assembly.
2. MODEL WITH DOUBLE LOCK
1) Disconnect the connectors and detach the trunk
opener cable.
2) Remove the two bolts and clip to remove trunk
lid lock assembly.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
• Apply grease to the movable part.
• Make sure the lock works correctly after installa-
tion.
C: INSPECTION
1) Disconnect the trunk lid actuator harness con-
nector.
Trunk Lid Lock Assembly
2) Connect the battery to trunk lid actuator termi-
nals.
If defective, replace the trunk lid actuator.
3) Check the striker for deformation or abnormal
wear.
SL-00243
4) Check the safety lever for improper movement.
5) Check other levers and the spring for rust forma-
tion and unsmooth movement.
6) Check the trunk opener cable for smooth opera-
tion.
SL-00308
SL-39
Terminal No.
No. 2 (+) and No. 1 (")
SECURITY AND LOCKS
3 2 1
SL-00255
Actuator operation
Locked $ Unlocked