6. Tweeter
A: REMOVAL
1. MODEL WITH TWEETER
1) Disconnect the ground cable from battery.
2) Remove the front door trim. <Ref. to EI-48, RE-
MOVAL, Door Trim.>
3) Remove the tweeter mounting screws.
4) Disconnect the harness connector and remove
tweeter.
2. MODEL WITH MCINTOSH AUDIO SYS-
TEM
1) Disconnect the ground cable from battery.
2) Remove the front door trim. <Ref. to EI-48, RE-
MOVAL, Door Trim.>
3) Remove the gusset cover. <Ref. to GW-18, RE-
MOVAL, Outer Mirror Assembly.>
4) Disconnect the harness connector and remove
tweeter.
B: INSTALLATION
Install in the reverse order of removal.
Tweeter
ET-00081
ET-00082
ET-7
ENTERTAINMENT