Subaru Legacy 2004 Service Manual page 3227

3) Apply a thin coat of Molykote AS880N (Part No.
K0779YA010) to the three frictional portions be-
tween inner shim and outer shim of outer pads.
4) Install the pad on support.
5) Install the caliper body on support.
Tightening torque:
"
27 N m (2.8 kgf-m, 19.9 ft-lb)
2. 16-INCH TYPE
Refer to 15-inch type. <Ref. to BR-16, 15-INCH
TYPE, INSTALLATION, Front Brake Pad.>
3. 17-INCH TYPE
1) Apply a thin coat of Molykote M7439 to the pad
clip.
2) Apply a thin coat of Molykote AS880N (Part No.
K0779YA010) to the frictional portion between pad
and pad inner shim.
Front Brake Pad
3) Apply a thin coat of Molykote AS880N (Part No.
K0779YA010) to the three frictional portions be-
tween inner shim and outer shim of outer pads.
BR-00341
4) Install the pad on support.
NOTE:
Install the pad indicator in proper direction.
BR-00340
CAUTION:
• Correctly install the pad return spring to sup-
porting surface of pad clip as shown in the fig-
BR-00238
ure.
BR-17
(1)
(2)
(6)
(3)
(6)
(5)
(4)
(1) LH # IN
(2) LH # OUT
(3) RH # IN
(4) RH # OUT
(5) Pad indicator
(6) Pad return spring
BRAKE
BR-00341
(6)
(5)
(6)
BR-00342