Subaru Legacy 2004 Service Manual page 3336

POWER ASSISTED SYSTEM (POWER STEERING)
8) Disconnect the suction hose and return hose
from reservoir tank. Remove the oil cooler from oil
cooler bracket.
(4)
(3)
(5)
(1)
(2)
(1) Reservoir tank
(2) Suction hose
(3) Return hose
(4) Oil cooler
(5) Oil cooler bracket
9) Remove the hose bracket and take out the hose
assembly from vehicle.
(1) Hose ASSY
(2) Hose bracket
B: INSTALLATION
1) Temporarily tighten the bolt of hose bracket.
(1) Hose ASSY
(2) Hose bracket
2) Install the resin clip to the pressure hose and
suction hose.
Pipe Assembly [LHD Model]
PS-00482
(2)
(1)
PS-00451
(2)
(1)
PS-00451
CAUTION:
Align the installation position of the resin clip
with the protector edge of suction hose.
(1)
(4)
(1) Resin clip
(2) Protector
(3) Suction hose
(4) Pressure hose
3) Connect the suction hose and return hose to res-
ervoir tank. Install the oil cooler to oil cooler brack-
et.
CAUTION:
Firmly insert the resin clip of return hose to the
bracket.
(3)
(1) Reservoir tank
(2) Suction hose
(3) Return hose
(4) Oil cooler
(5) Oil cooler bracket
4) Connect the suction hose and pressure hose to
the oil pump. Tighten the eye bolt of pressure hose.
PS-66
(2)
(3)
PS-00455
(4)
(5)
(1)
(2)
PS-00482