Subaru Legacy 2004 Service Manual page 3690

Hide thumbs Also See for Legacy 2004:

Table of Contents

WIPER AND WASHER SYSTEMS

7. Front Wiper Motor and Link

1) Disconnect the ground cable from battery.

2) Remove the cowl panel. <Ref. to EI-39, RE-

MOVAL, Cowl Panel.>

3) Disconnect the connector of wiper motor assem-

4) Remove the bolt to remove wiper assembly.

Wiper motor and wiper link can not be disassem-

bled, because those are assembly part.

B: INSTALLATION

Install in the reverse order of removal.

Tightening torque:

Refer to "COMPONENT" of "General Descrip-

<Ref. to WW-2, FRONT WIPER, COMPO-

NENT, General Description.>

C: INSPECTION

1) When the battery is connected to the terminal of

connectors, confirm that the wiper motor operates

at low speed.

Front Wiper Motor and Link

2) When the battery is connected to the terminal of

connectors, confirm that the wiper motor operates

at high speed.

3) Connect the battery to terminals of connector,

and remove the terminal connection with wiper mo-

tor rotated at low speed, and stop the wiper motor

through operation.

Chapters

Table of Contents