Subaru Legacy 2004 Service Manual page 3487

Disposal of Airbag Module (Deployment Processing After Removal from Vehi-
CAUTION:
The deployment tool should be kept shorted
terminals until just before deployment of airbag
module.
(A) Deployment tool:
(Tool number 98299PA030)
(B) Deployment adapter A:
(Tool number 98299FC030)
9) Connect the deployment adapter A connector to
airbag module.
10) Install the airbag module on a 14-inch or great-
er size tire without wheel.
11) Put a tire without a wheel (A) under the tire in-
stalled with the curtain airbag module (B). Put on
two additional tires without a wheels (C), and then
put a tire with a wheel (D) on top. Fasten them tight
with a rope.
(A)
cle)
12) Move the battery at least 5 m (16 ft) from tires,
and secure the nearby area. Connect the deploy-
ment tool alligator clip to the battery negative (#)
terminal.
SB-00016
13) Connect the other cable of deployment tool to
the battery positive (+) terminal, and deploy the
airbag module.
CAUTION:
• After deployment, the airbag module will be
especially hot, leave it unattended for 40 min-
AB-00658
utes, and discard it.
• Do not let water get on the deployed airbag
module.
14) Wrap the deployed airbag module in airtight vi-
nyl bag, and discard it.
(D)
(C)
(B)
AB-00659
AB-35
(1) 5 m (16 ft) or more
AIRBAG SYSTEM
SB-00065
SB-00018
AB-00655