Subaru Legacy 2004 Service Manual page 3391

10.Blower Resistor (Manual A/C
Model)
A: REMOVAL
1) Remove the glove box lower cover on passen-
ger side. <Ref. to EI-51, REMOVAL, Glove Box.>
2) Disconnect the blower resistor connector.
3) Remove two screws, and then remove the blow-
er resistor.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
(2)
(4)
Measure the blower resistor resistance.
Terminal No.
4 and 2
4 and 3
4 and 1
If NG, replace the blower resistor.
Blower Resistor (Manual A/C Model)
AC-00916
(1)
(3)
AC-00766
Standard
Approx. 0.44 '
Approx. 1.12 '
Approx. 2.92 '
AC-29
HVAC SYSTEM (HEATER, VENTILATOR AND A/C)