Subaru Legacy 2004 Service Manual page 3322

POWER ASSISTED SYSTEM (POWER STEERING)
16) Using ST1 and ST2, repair the caulking portion
of cylinder.
ST1 34099FA080 PUNCH
ST2 34199FE020 BASE (Turbo and 3.0 R mod-
el)
ST2 34099FA070 BASE (Except for turbo and
3.0 R model)
(1) Cylinder
17) If the cylinder edge is deformed in a convex
shape, repair using an oil stone.
18) Remove the oil seal using ST and press from
plug.
ST 34199AE100 OIL SEAL PLUG REMOVER
Steering Gearbox [RHD Model]
PS-00066
PS-00067
PS-52
NOTE:
Do not apply force on the plug edge surface.
(1) Oil seal
(2) O-ring
19) Set the ST in the dimension as shown in the fig-
ure.
ST 34199AE120 GEARBOX OIL SEAL RE-
MOVER
(1) 70 mm (2.76 in)
PS-00068
PS-00069