Wiper Blade - Subaru Legacy 2004 Service Manual

Hide thumbs Also See for Legacy 2004:

Table of Contents

4. Wiper Blade

When replacing wiper blades or etc., be sure to

stand up the driver side wiper arm first, then

passenger side wiper arm next. Also, when put-

ting the wiper arms back, be sure to start with

passenger side first, then driver side next. Do-

ing this in the reverse order may result in dam-

age of passenger side wiper arm by hitting with

driver side wiper blade.

While pushing the locking clip (A) up, pull out the

blade from arm to the arrow direction.

Turn the blade in the direction of arrow (A) and re-

move it from arm.

(A) Turn the wiper blade.

(1) Wiper arm

(2) Wiper blade

(3) Installing part of wiper blade

B: INSTALLATION

1) Install in the reverse order of removal.

2) Confirm that the clip is locked securely.

WIPER AND WASHER SYSTEMS

C: DISASSEMBLY

1. METAL TYPE

Pull side (A) of the wiper rubber stopper and re-

move the rubber from blade assembly.

2. RESIN TYPE

Pull the wiper rubber top slightly from the stopper

(A) and pull out fully.

Table of Contents