Trunk Room Light - Subaru Legacy 2004 Service Manual

Hide thumbs Also See for Legacy 2004:
Table of Contents

Advertisement

32.Trunk Room Light

A: REMOVAL
1) Disconnect the ground cable from battery.
2) Turn the trunk room light counterclockwise to
60$ to remove it and disconnect the harness con-
nector.
3) Remove the bulb (A).
(A)
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1. TRUNK ROOM LIGHT BULB
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new one.
2. TRUNK LID SWITCH (TRUNK ROOM
LIGHT SWITCH)
Measure the resistance between trunk lid switch
terminals.
Trunk Room Light
LI-00321
LI-00286
3
2
1
LI-00290
LI-37
Trunk lid position
Terminal No.
Close
1 and 3
Open
LIGHTING SYSTEM
Standard
More than 1 M!
1.5%0.5 !

Advertisement

Table of Contents
loading

Table of Contents